NEWCASTLE OFFICE 0191 2322574
TEESSIDE OFFICE 01642 356500
Since 1876

Nestle Newcastle Factory Fine

Posted on 2nd November, 2022

Nestle Newcastle factory fine after an employee suffered life-changing injuries.  The incident happened on 30 November 2020 when the man was drawn into a roller mechanism on a conveyor machine.

South Tyneside Magistrates’ Court heard how the maintenance technician was investigating a problem on the conveyor belt of a machine used to make chocolate sweets. While checking the machine, his sleeve was caught in a roller, which dragged his left arm into the machine, trapping it between the roller and a conveyor belt.

A Health and Safety Executive (HSE) investigation into the incident at Nestle’s factory on Rowan Drive, Fawdon, Newcastle upon Tyne found that the company had not properly assessed the risk created by the rollers under the conveyor belt and failed to guard the roller, which was a dangerous part.

It was foreseeable that employees would require access to this area and there was a clear risk of injury to employees coming into contact with this roller. Nestle had previously been prosecuted following a similar incident at its Halifax factory.

Nestle UK Ltd of City Place, Gatwick, West Sussex, pleaded guilty to breaching Regulation 11(1) of the Provision and Use of Work Equipment Regulations 1998 and was fined £800,000, ordered to pay costs of £7,776.50 and a victim surcharge of £190 at South Tyneside Magistrates’ Court on October 19.

After the hearing, HSE inspector William Gilroy said:

“This incident could easily have been avoided had Nestle properly reviewed the safety measures at its plant and its equipment to ensure that access to dangerous parts was prevented.

“Nestle was aware of this risk following a similar incident at its Halifax plant but failed to take appropriate action.”

 

Work Equipment Guidance

The Provision and Use of Work Equipment Regulations 1998, often abbreviated to PUWER, place duties on people and companies who own, operate, or have control over work equipment. PUWER also places responsibilities on businesses and organizations whose employees use work equipment, whether owned by them or not.  PUWER requires that equipment provided for use at work is:

  • suitable for the intended use
  • safe for use, maintained in a safe condition, and inspected to ensure it is correctly installed and does not subsequently deteriorate
  • used only by people who have received adequate information, instruction, and training
  • accompanied by suitable health and safety measures, such as protective devices and controls. These will normally include guarding, emergency stop devices, adequate means of isolation from sources of energy, clearly visible markings, and warning devices
  • used by specific requirements, for mobile work equipment and power presses

Some work equipment is subject to other health and safety legislation in addition to PUWER. For example, lifting equipment must also meet the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), pressure equipment must meet the Pressure Systems Safety Regulations 2000 and personal protective equipment must meet the Personal Protective Equipment at Work Regulations 1992 (PPE).

If your business or organization uses work equipment or is involved in providing work equipment for others to use (e.g. for hire), you must manage the risks from that equipment. This means you must:

  • ensure the equipment is constructed or adapted to be suitable for the purpose it is used or provided for
  • take account of the working conditions and health and safety risks in the workplace when selecting work equipment
  • ensure work equipment is only used for suitable purposes
  • ensure work equipment is maintained in an efficient state, in efficient working order, and in good repair
  • where a machine has a maintenance log, keep this up to date
  • where the safety of work equipment depends on the manner of installation, it must be inspected after installation and before being put into use
  • where work equipment is exposed to deteriorating conditions liable to result in dangerous situations, it must be inspected to ensure faults are detected in good time so the risk to health and safety is managed
  • ensure that all people using, supervising, or managing the use of work equipment are provided with adequate, clear health and safety information. This will include, where necessary, written instructions on its use and suitable equipment markings and warnings
  • ensure that all people who use, supervise, or manage the use of work equipment have received adequate training, which should include the correct use of the equipment, the risks that may arise from its use, and the precautions to take
  • where the use of work equipment is likely to involve a specific risk to health and safety (eg woodworking machinery), ensure that the use of the equipment is restricted to those people trained and appointed to use it
  • take effective measures to prevent access to dangerous parts of machinery. This will normally be by fixed guarding but where routine access is needed, interlocked guards (sometimes with guard locking) may be needed to stop the movement of dangerous parts before a person can reach the danger zone. Where this is not possible, such as with the blade of a circular saw, it must be protected as far as possible and a safe system of work used. These protective measures should follow the hierarchy laid down in PUWER regulation 11(2) and the PUWER Approved Code of Practice and guidance or, for woodworking machinery, the Safe use of woodworking machinery: Approved Code of Practice and guidance
  • take measures to prevent or control the risks to people from parts and substances falling or being ejected from work equipment or the rupture or disintegration of work equipment
  • ensure that the risks from very hot or cold temperatures from the work equipment or the material being processed or used are managed to prevent injury
  • ensure that work equipment is provided with appropriately identified controls for starting, stopping, and controlling it and that these control systems are safe
  • where appropriate, provide suitable means of isolating work equipment from all power sources (including electric, hydraulic, pneumatic, and gravitational energy)
  • ensure work equipment is stabilized by clamping or otherwise to avoid injury
  • take appropriate measures to ensure maintenance operations on work equipment can be carried out safely while the equipment is shut down, without exposing people undertaking maintenance operations to risks to their health and safety

When providing new work equipment for use at work, you must ensure it conforms with the essential requirements of any relevant product supply law (for new machinery this means the Supply of Machinery (Safety) Regulations 2008). You must check it:

  • has appropriate conformity marking and is labeled with the manufacturer’s details
  • comes with a Declaration of Conformity
  • is provided with instructions in English
  • is free from obvious defects – and that it remains so during its working life

If you require advice on health and safety in your workplace, please contact Mark Stouph in Jacksons’ Regulatory Team.


Please share the article

Most recent posts

Monthly Archive

Website ©Copyright Jacksons Law Firm 2024

The Legal 500 - Leading Firm 2019